SMB002 Brushed Nickel SHOWERMI$ER Unit for Home/Commercial
The SHOWERMI$ER connects where the shower head currently is installed. It is then connected on the other side to a piping system which is non-pressurized that leads to a potable water storage tank.
You simply remove the shower head, attach the SHOWERMI$ER unit, line up and mark where the return line will be, and then drill only one hole in the shower wall through to the outside wall. Using a return line with a 1/2″ female pipe attach the return line to the SHOWERMI$ER unit. Finally, connect the other side of the return line to non-pressurized piping system that leads to the potable water storage tank.
What comes in the Kit*:
- 1 SHOWERMI$ER unit (one end glued to female coupling)
- 1 diverter valve (Chrome, Brushed Nickel or ORB
- 1 diverter washer
- 1 Extra 90 Degree Elbow
- 1 Extra Female Coupling* See main product page for installation requirements and exceptions.
SMB002 Brushed Nickel SHOWERMI$ER Unit for Home / Commercial quantity
There are no reviews yet.